Datasheet4U Logo Datasheet4U.com

MAX16124 - Dual Pushbutton Controllers

This page provides the datasheet information for the MAX16124, a member of the MAX16122 Dual Pushbutton Controllers family.

Description

The MAX16122

MAX16125 pushbutton controllers with single-supply monitors monitor one or two pushbuttons and generate a hard reset signal if the buttons are pushed and held for a setup delay.

Features

  • Low Supply Current: < 5μA (typ) at 3V Over Temperature.
  • Precision Factory-Set VCC Monitoring Threshold for 1.8V, 2.5V, 3.3V, and 5V Supplies.
  • Fixed/Pin-Programmable or Resistor-Adjustable Pushbutton Setup Delay.
  • Up to 2 Reset Outputs and 2 Debounced Pushbutton Inputs.
  • Guaranteed RESET Valid for VCC Down to 0.95V.
  • Active-Low RESET Output (Push-Pull or Open-Drain).
  • Immune to Short Power-Supply Transients.
  • 0.86mm x 1.2.

📥 Download Datasheet

Datasheet preview – MAX16124

Datasheet Details

Part number MAX16124
Manufacturer Maxim Integrated
File Size 892.73 KB
Description Dual Pushbutton Controllers
Datasheet download datasheet MAX16124 Datasheet
Additional preview pages of the MAX16124 datasheet.

📁 Similar Datasheet

  • MAX1612 - Bridge-Battery Backup Controller (Maxim)
  • MAX16126 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX16127 - Load-Dump/Reverse-Voltage Protector (Maxim Integrated Products)
  • MAX161 - CMOS 8-Bit 8Channel Data Acquisition System (Maxim)
  • MAX1610 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1611 - Digitally Controlled CCFL Backlight Power Supplies (Maxim)
  • MAX1613 - Bridge-Battery Backup Controller (Maxim)
  • MAX1614 - High-Side / N-Channel MOSFET Switch Driver (Maxim)
  • MAX1615 - Low-Power Linear Regulators (Maxim)
  • MAX16165 - 4-Channel Sequencer and Superviso (Analog Devices)
Other Datasheets by Maxim Integrated
  • MAX16122 - Dual Pushbutton Controllers
  • MAX16123 - Dual Pushbutton Controllers
  • MAX16125 - Dual Pushbutton Controllers
  • MAX16128 - Load-Dump/Reverse-Voltage Protection Circuits
  • MAX16129 - Load-Dump/Reverse-Voltage Protection Circuits
  • MAX16132 - Single/Dual/Triple/Quad-Voltage uP Supervisors
  • MAX16133 - Single/Dual/Triple/Quad-Voltage uP Supervisors
  • MAX16134 - Single/Dual/Triple/Quad-Voltage uP Supervisors

Full PDF Text Transcription

Click to expand full text
Click here for production status of specific part numbers. MAX16122–MAX16125 Dual Pushbutton Controllers in Tiny 6-Bump WLP Package General Description The MAX16122–MAX16125 pushbutton controllers with single-supply monitors monitor one or two pushbuttons and generate a hard reset signal if the buttons are pushed and held for a setup delay. These devices make it easy to “hide” the hard reset function in an existing pushbutton, such as a soft power switch. The devices operate from 1.6V to 5.5V and consume a quiescent current of only 5µA at 3V. The MAX16122–MAX16125 have pin-programmable or resistor-adjustable setup delay.
Published: |